Copyright © ZTEWeLink Technology Co., LTD, All rights reserved.
27
GE2015
Dev Board User Guide
7
Jumper(X4
、
X5)
MP0 or MP1 select.
1. When the module is PCIE MP0, X4&X5 need to locate to the left, which stands for the signal of WAKEUP_OUT and NC
separately.
2. When the module is PCIE MP1, X4&X5 need to locate to the right, which stands for the signal of MIC_P and MIC_N separately.
MP0
MP1
8
Earphone console
Earphone console
9
Jumper (X14, X16, X17, X19)
MP0 or MP1 select.
1. When the module is PCIE MP0, X14, X16, X17, X19 need to locate to the left, which stands for the signal of IN11 (UART_RXD),
PIN23(UART_CTS), PIN31(UART_DTR), PIN33(UART_DCD)separately.
2. When the module is PCIE MP1, X14, X16, X17, X19 need to locate to the right, which stands for the signal of PIN11 (1.8V),
PIN23(UART_RX), PIN31(UART_TX), PIN33(RESET_IN)separately.
Note:
ME3630-PCIE module has MP0(PCM interface) and MP1(analogue audio interface), the detail information can refer to hardware user
guide.
