INSTALLATION
Install Grommets and Bushings
1. Insert 1 Grommet (7) into each hole in wind-
shield. Figure 2
2. On windshield, insert a Large Bushing (2)
into each upper hole of grommet. Figure 3
3. On windshield, insert a Small Bushing (3)
into each lower hole of grommet. Figure 3
Install Windshield on Motorcycle
4. Secure Windshield to OEM mounts at the 2
upper hole locations with a cap (5) and a M5 x
45 Screw (6). (3mm Hex Key) Figure 4
5. Secure Windshield at the 2 lower hole loca-
tions with a cap (5) and a M5 x 25 Screw (4).
(3mm Hex Key) Figure 4
6. Tighten all 4 screws securely. (3mm Hex
Key) Figure 4
ZTechnik PO Box Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 / www.ZTechnik.com / e mail: [email protected]
©2016 National Cycle, Inc.
Page 2 of 3
10-118605-000 04/16
Figure 3
Figure 4
7
Figure 2
2
3
6
5
4
5