Chapter 2 Hardware Descriptions
Figure 2-10 Carrier Sector Extension Cable
2.3.7 RF Jumper Cable
RF jumper cable is used to transfer signals between ZXSDR R8860cabinet and antenna,
between ZXSDR R8860cabinet and main feeder cable, and between main feeder cable
and antenna.
When the distance between antenna and ZXSDR R8860cabinet is less and the adopted
feeder cable is of 1/2 in. then, the jumper cable is not used, rather ZXSDR R8860cabinet
is directly connected with the feeder cable and feeder cable is connected to the antenna.
If the adopted feeder cable is of 7/8 in. or 5/4 in. then jumper is used.
shows
the RF jumper cable.
Figure 2-11 RF Jumper Cable
Note:
The length of the RF jumper cable is determined according to the actual situation.
2-9
SJ-20100722143906-001|08/30/2010
ZTE Proprietary and Confidential
Содержание ZXSDR R8860
Страница 4: ...II ...
Страница 6: ...II ...
Страница 8: ...II ...
Страница 58: ...Tables This page intentionally left blank ...