Zte ZXSDR BS8800 C100, Руководство по оборудованию

Страница: 62 / 83

ZXSDR BS8800 C100 Hardware Manual
12. joint with the white wire of white/blue and white/orange
twisted-pair.
13. joint with the red wire of red/blue twisted-pair
Fiber
Function
The fiber cable is used to fulfill the signal interaction between
ZXSDR BS8800 C100baseband subrack and ZXSDR BS8800
C100RF subrack.
Appearance
The single mode fiber is used in ZXSDR BS8800 C100, and the
both ends of fiber are LC/LC connectors, as shown in
Figure 39
F
IGURE
39 S
INGLE
M
ODE
F
IBER
A
PPEARANCE
AISG Control Cable
Function
AISG control cable is used to transmit power and communication
signal between ZXSDR BS8800 C100 and AISG devices. The AISG
control cable is classified in to two types based on connection posi-
tions. One of them is used to connect ZXSDR BS8800 C100’s RSU
plane with a ’T’ type connector, and another one is used to con-
nect the ’T’ type connector to electrically tuned antenna amplifier
or tower amplifier.
Appearance
Figure 40 illustrates the appearance of AISG control cable that con-
nects the ZXSDR BS8800 C100’s RSU with the ’T’ type connector,
and the
Figure 41 illustrates the appearance of AISG control cable
that connects the ’T’ type connector with antenna or tower ampli-
fier.
F
IGURE
40 AISG C
ONTROL
C
ABLE
(RSU
TO
T
TYPE
C
ONNECTOR
)
56 Confidential and Proprietary Information of ZTE CORPORATION