Zte ZXR10 GER, Руководство пользователя

Страница: 357 / 412

Chapter 24 Multicast Routing Configuration
Confidential and Proprietary Information of ZTE CORPORATION 335
multicast routing protocol, including multicast configuration,
showing multicast routing table and multicast forwarding table.
1. To start the multicast protocol, use
ip multicast-routing
command in global configuration mode as shown in Table
376.
T
A B L E
3 7 6 I
P
M
U L T I C A S T
R
O U T I N G
C
O M M A N D
Command
Format
Command
Mode
Command Function
ip
multicast-
routing Global config
This starts the multicast
protocol
Result: This starts the multicast protocol.
2. To clear multicast routing, use clear ip mroute command in
Privileged mode as shown in Table 377.
T
A B L E
3 7 7 C
L E A R
I
P
M
R O U T E
C
O M M A N D
Command
Format
Command
Mode
Command Function
clear ip
mroute
Global config
This clears multicast routing
table.
Result: This clears multicast routing table.
E
ND OF STEPS
Configuring IGMP
Below procedure gives information about configuring IGMP.
Router Command Line Interface has been accessed.
1. To start IGMP for different version according to the actual
conditions, use access-group < access-list-number >
command in interface configuration mode as shown in Table
378.
T
A B L E
3 7 8 I
P
I
G M P
V
E R S I O N
C
O M M A N D
Command
Format Command
Mode
Command Function
ip igmp
version
<version>
Interface config
This starts IGMP for different
version according to the actual
conditions
Result: This starts IGMP for different version according to
the actual conditions.
Purpose
Prerequisite
Steps