Zte ZXR10 GER, Руководство пользователя

Страница: 196 / 412

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
174 Confidential and Proprietary Information of ZTE CORPORATION
< ip-address > refers to format 0.0.0.0.
< wildcard-mask > A wildcard mask is a 32-bit quantity used
in conjunction with an Internet address to determine
which bits in an Internet address should be ignored when
comparing that address with another Internet address. This
refers to filter out a subnet.
Result: This configures RIP interfaces between certain
numbers of a specified network address.
E
ND OF STEPS
Example: As shown in Figure 85 , RIP runs on router R1 and
router R2.
F
I G U R E
8 5 B
A S I C
R
I P
C
O N F I G U R A T I O N
R1 R2
192.168.1.1/24
192.168.1.2/24 10.1.0.1/16
10.2.0.1/16
Configuration of R1:
Configuration of R2:
ZXR10_R2(config)#router rip
ZXR10_R2(config-router)#network 10.2.0.0 0.0.255.255
ZXR10_R2(config-router)#network 192.168.1.0 0.0.0.255
RIP Enhanced Configuration
This below procedure delivers information about enhanced RIP
configuration
„
Router Command Line Interface has been accessed.
„
RIP is running on a network as described in above basic IP
configuration.
1. To adjust timer for better rip performance in some cases, use
command timers basic <update> <invalid>
<holddown> <flush> in RIP config mode as shown in
Table 211. To restore the default timers, use the no form of
this command.
ZXR10_R1(config)#router rip
ZXR10_R1(config-router)#network 10.1.0.0 0.0.255.255
ZXR10_R1(config-router)#network 192.168.1.0 0.0.0.255
Purpose
Prerequisite
Steps