ZXR10 2900E Series Configuration Guide
l
Loopback Message (LBM): A unicast CFM protocol data unit. It is sent to a specified
MP from an MEP, expected to receive an LBR message.
l
Loopback Reply (LBR): A unicast CFM protocol data unit. It is sent by the MP receiving
an LBM as the reply to the LBM.
With the five protocol messages listed above, CFM implements the following functions:
l
Detecting faults: MEP detects network connectivity faults by periodically sending
and receiving CCM messages. The faults include connection failure and unwelcome
connection (error connection).
l
Notifying faults: After MEP detects a connectivity fault, it sends a proper alarm to the
specified management system, for example, trap messages of SNMP.
l
Locating a path: MEP locates and traces a path from an MEP to another MP (including
MEP and MIP) by using LTM/LTR messages.
l
Confirming and separating a fault: This is an administrative function. The network
manager confirms the fault through LBM/LBR messages and separates the fault.
Configuring a 802.1AG Command
802.1AG configuration includes the following commands:
Command
Function
zte(cfg)#
cfm
{
disable
|
enable
}
Enables/disables the CFM function.
zte(cfg)#
create cfm md-session
<
1-16
>
name
<
string
>
level
<
0-7
>
Creates a CFM md
zte(cfg)#
create cfm md-session
<
1-16
>
ma-session
<
1-32
>
name
<
string
>
Creates a CFM ma
zte(cfg)#
create cfm md-session
<
1-16
>
ma-session
<
1-32
>
mep-session
<
1-64
>
mep-id
<
1-8191
>
direction
{
down
|
up
}
Creates a CFM local mep
zte(cfg)#
create cfm md-session
<
1-16
>
ma-session
<
1-32
>
mip-session
<
1-64
>
name
<
string
>
Creates a CFM mip
zte(cfg)#
create cfm md-session
<
1-16
>
ma-session
<
1-32
>
rmep-session
<
1-64
>
rmep-id
<
1-8191
>
remote-mac
<
hh.hh.hh.hh.hh.hh
>
Creates a CFM remote mep
zte(cfg)#
cfm md-session
<
1-16
>
ma-session
<
1-32
>
primary-vlan
<
1-4094
>
Sets the primary VLAN within cfm ma
zte(cfg)#
cfm md-session
<
1-16
>
ma-session
<
1-32
>
ccm time-interval
<
4-7
>
Sets the interval that ccm packets of
mep within cfm ma are sent.
zte(cfg)#
cfm md-session
<
1-16
>
ma-session
<
1-32
>
ccm md-name
{
absent
|
disable
|
present
}
Sets the way to fill in the MEG ID field
in a cfm ccm messages.
zte(cfg)#
cfm md-session
<
1-16
>
ma-session
<
1-32
>
mep-id
<
1-8191
>
state
{
disable
|
enable
}
Sets the status of the cfm mep protocol.
4-140
SJ-20120409144109-002|2012-07-02(R1.0)
ZTE Proprietary and Confidential
Содержание ZXR10 2910E-PS
Страница 6: ...IV ...
Страница 8: ...II ...
Страница 264: ...Tables This page intentionally left blank ...