Chapter 4
ZXR10 1800-2S Chassis
The ZXR10 ZSR V2 series routers are highly flexible by using the modular structure, and
the boards and components are hot swappable. The entire router consists of the chassis,
backplane, MPFU, line interface boards, power supply modules, and fan modules.
The ZXR10 1800-2S is a desktop product. The power supply module and MPFU are fixed
in the chassis. The service boards are installed on the rear panel and the rear leading-out
mode is used.
The ZXR10 1800-2S has two extension types configured with wireless modules: ZXR10
1800-2S(G) and ZXR10 1800-2S(W).
l
The ZXR10 1800-2S(G) has a built-in LTE module, where a SIM card slot is available
for supporting GSM, WCDMA, TD-SCDMA, or LTE networks.
l
The ZXR10 1800-2S(W) has a built-in WiFi module for supporting the WiFi function.
Table of Contents
4.1 Structure
4.1.1 Overview and Structure
Overview
The height of the ZXR10 1800-2S chassis (excluding the antenna) is 1U (1U = 44.45 mm),
and the dimension (width × height × depth) 380 mm × 43.6 mm × 200 mm. For a description
of the main components of the ZXR10 1800-2S, refer to
.
Table 4-1 Descriptions of the Main Components of the ZXR10 1800-2S
Component Name
Description
Board area
The ZXR10 1800-2S provides a maximum of two line interface
card slots.
MPFU
The MPFU of the ZXR10 1800-2S is integrated into the chassis
and cannot be removed.
Power supply module
The power supply module of the ZXR10 1800-2S is integrated on
the device, and cannot be removed or installed.
4-1
SJ-20150204153047-004|2015-03-30 (R1.0)
ZTE Proprietary and Confidential