Zte ZXHN H3601, Руководство по управлению техническим обслуживанием

Страница: 60 / 89

ZXHN H3601 Maintenance Management Guide
Parameter Description
O: other stateful configuration.
If
On button is selected, the value is 1. If Off button is selected,
the value is 0.

M = 0 and O = 0: SLAAC is used for acquiring information. It
is applicable to a network without the DHCPv6 architecture.

M = 1 and O = 1: DHCPv6 is used for acquiring the address
and other configuration information.

M = 0 and O =1: SLAAC is used for acquiring address
information. DHCPv6 is used only for acquiring network
parameter settings except the IP address.

M = 1 and O = 0: DHCPv6 is used only for acquiring the
address information.
Prefix Delegate Type Prefix Delegate Type:

AutoSense: One prefix selected automatically from all the
available prefixes will be delegated.

Manual: One or more prefixes selected manually from all the
static prefixes configured before will be delegated.
3. Click Apply button to apply the changes.
Configure the Port Control.
1. Click Port Control to open the Port Control page, see Figure 6-16 .
Figure 6-16 Port Control Page
6-14 SJ-20200429083356-004 | 2020-07-23(R1.0)