Zte ZXHN H3601, Руководство по управлению техническим обслуживанием

Страница: 33 / 89

5 Configure the Internet
Figure 5-12 Anti-DoS Attack Page
2. Set the parameters. For a description of the parameters, refer to Table 5-5 .
Table 5-6 Anti-DoS Attack Parameter Descriptions
Parameter Description
Enable To enable the Anti-PortScan to be configured, select this check box.
Threshold Threshold means the maximum number of TCP or UDP connections
from one host in WAN side to CPE itself every 3 seconds.
3. Click
Apply
button to apply the changes.
5.4.2 Configure the Filter Criteria
The section describes how to configure filter criteria.
Steps
Filter Switch and Mode Configuration
1. On the main page of the ZXHN H3601, select Internet > Security > Filter Criteria to
the
Filter Criteria
page.
2. Click Filter Switch and Mode Configuration to the configuration page, see Figure
5-13 .
Figure 5-13 Filter Switch and Mode Configuration Page
3. Configure filter switch and mode configuration parameters, see Table 5-7 .
SJ-20200429083356-004 | 2020-07-23(R1.0) 5-13