Zte ZXHN H3600, Руководство по управлению техническим обслуживанием

Страница: 36 / 100

ZXHN H3600 Maintenance Management Guide
Parameter Description
Traffic Classes
is used to bind classification to a queue. Use "," to join
numbers when binding several classifications, e.g. "1,2,10". Please note
that different queues in an interface cannot bind the same classification.
2. Click Apply button to apply the changes.
Note

Each interface can be configured up to 8 queues. When the queues of interface
are emptied, scheduling policies will be removed.

Under the same interface, if a queue's algorithm is SP, its priority must not be
used by other queues.

There is a default queue in every interface. If not specified, the first queue will
work as the default queue, otherwise, the last setting queue will be the default
queue. Note that the default queue will automatically enabled and can not be dis-
abled.

"Traffic Classes" is used to bind classification to a queue. Use "," to join num-
bers when binding several classifications, e.g. "1,2,10". Please note that different
queues in an interface cannot bind the same classification.
5.3.4 Configure the QoS Traffic Shaping
The procedure provides the parameters of QoS traffic shaping configuration features.
Steps
1. On the main page of the ZXHN H3600, select Internet > QoS > Traffic Shaping to
open the Traffic Shaping page, see Figure 5-13 .
Figure 5-13 Traffic Shaping
30 SJ-20201203151144-003 | 2021-06-16(R1.0)