Zte ZXHN H268A, Руководство по управлению техническим обслуживанием

Страница: 31 / 80

Chapter 4 Configure the Internet
2. Configure the port forwarding parameters.
Table 4-7 lists the port forwarding settings parameters.
Table 4-7 Port Forwarding parameters
Parameter Description
Port Forwarding Switch Enable or disable the Port Forwarding function.
Name Virtual host name, which cannot be null.
Protocol Protocol name, including TCP and UDP.
The default protocol is TCP.
LAN Host IPv4 address or MAC address of the LAN side host.
WAN Port Port segment of the WAN-side hosts. Range: 1~65535.
LAN Host Port Port number range of the LAN-side host. Range: 1~65535.
3. Click Apply button to apply the changes.
Note:
l
This function allows users to access the virtual hosts of LAN side from WAN side.
l By using port forwarding, the accessing to hosts between assigned IP and port
from WAN side is forwarded to one host of LAN side.
– End of Steps –
4.4 Configure the DDNS
The section describes how to configure DDNS . DDNS provides the parameters of DDNS
configuration function.
Steps
1. On the main page of the ZXHN H268A, select Internet > DDNS to open the DDNS
page, as shown in Figure 4-11 .
4-17
SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential