Zte ZXHN H267N, Руководство по управлению

Страница: 48 / 112

ZXHN H267N Maintenance Management Guide
3. Click Apply button to apply the changes.
– End of Steps –
3.4.7 Configure the Port Trigger
The section describes how to configure Port Trigger. Port Trigger provides the parameters
of Port Trigger configuration features.
When one port is configured to be the triggering port, if one application uses that triggering
port to setup a connection to the outside, the ZXHN H267N device will forward the outside
connection to the internal forwarding port.
The port triggering is used to protect the ports. The system will not open these ports unless
these ports are triggered.
Steps
1. On the main page of the ZXHN H267N, select Internet > Security > Port Trigger to
go to the Port Trigger page, the page as shown in Figure 3-26 .
Figure 3-26 Port Trigger Configuration Page
2. Configure the Port Trigger parameters.
Table 3-19 lists the Port Trigger parameters.
Table 3-19 Parameter Descriptions for the Port Trigger
Parameter Description
Name The name of Port Trigger.
Trigger IP Address IP address of the computer in the LAN side.
3-32
SJ-20140702105807-002|2014-11-13 (R1.0) ZTE Proprietary and Confidential