Zte ZXHN H2640, Руководство по управлению техническим обслуживанием

Страница: 59 / 116

4 Configure the Internet
SJ-20200714160642-002 | 2020-07-27(R1.0) 4-33
Parameter Description
types and distinguish service priorities.The value range of
DSCP is 0~63 and each DSCP code value is mapped to a
defined PHB (Per-Hop-Behavior) code.
3. Click Apply button to apply the changes.
4.8 Configure the Mulitcast
4.8.1 Configure the IGMP
The section describes how to configure IGMP . IGMP provides the parameters of IGMP
configuration features.
1. On the main page of the ZXHN H2640, select Internet > Multicast > IGMP to the
IGMP page, see Figure 4-29 .
Figure 4-29 IGMP Configuration Page
2. Enable the IGMP functions, see Table 4-19 .
Table 4-19 Parameter Descriptions for the IGMP
Parameter Description
IGMP Proxy The system serves as a proxy server to forward IGMP packets
from the MDU/DSLAM to other devices.
3. Click Apply button to apply the changes.
4.8.2 Configure the MLD
The section describes how to configure MLD . MLD provides the parameters of MLD
configuration features.
Abstract
Steps
Abstract