Zte ZXHN H108L, Руководство по обслуживанию

Страница: 36 / 89

ZXHN H108L Wireless ADSL Router Maintenance Manual
22 Confidential and Proprietary Information of ZTE CORPORATION
Parameter Description
Connection Select whether your connection is always on or if it connects on
demand. If on demand specify how many minutes the connection
may be idle before it disconnects
TCP MSS Option Enter the TCP MSS to be used
Get IP Address Choose whether the ZXHN H108L obtains the IP address statically
or dynamically
Static IP Address Enter the static IP address. Only if static IP is selected.
IP Subnet Mask
Enter the IP subnet mask. Only if static IP is selected.
Gateway
Enter the gateway address. Only if static IP is selected.
NAT
Select whether NAT is enabled or disabled
Default Route Select whether this PVC will be the default route for the Internet
data
Dynamic Route
Select the RIP type and direction form the dropdown lists
Multicast
Select the multicast protocol to be used from the dropdown list
MAC Spoofing
Disabled in default, Select Enabled to set a fake MAC of modem
DHCP IPv6
Enable Select the
way of Modem to get IPv6 address
DHCP PD Enable Usually select Enable, or modem can’t access internet
MLD Proxy
Select whether MLD Proxy is enabled or disabled
Dual Stack Lite
Select whether enable DS Lite
Note: The parameters listed in Table 10 should be
provided by the ISP. The user name must be asigned by
the ISP.
B r i d g e M o d e
Figure 11 shows the bridge mode parameters on the web
configuration page and Table 11 gives the parameter descriptions.