Zte ZXG10 iBSC, Руководство по установке оборудования

Страница: 24 / 169

ZXG10 iBSC Hardware Installation Guide
Example
For unpacking the cabinet, refer to Figure 4-1 .
Figure 4-1 Unpacking Wooden Case
1. Cushion 1
2. Upper Cover
3. Cushion 2
4. Main Frame
5. Cabinet
6. Side Cover
4.3 Unpacking Carton
Steps
1. Check the label on the carton, count the types and quantities of the boards inside the
carton and accept them with signature.
2. Cut the straps with the a pair of offset pliers.
3. Cut the adhesive tape with a paper knife along the commissure of the box covers.
Note not to too deep, lest the internal articles should be damaged.
4. Open the carton, and take out the foam boards.
5. Check whether the board quantity is in accordance with that stated in the carton label,
and take out the boards together with their packing bags.
6. Open the anti-static packing bag, and take out the circuit board.
4-2
SJ-20110531095035-004|2011-10-28 (R2.0) ZTE Proprietary and Confidential