Zte ZXG10 iBSC, Руководство по установке оборудования

Страница: 127 / 169

Chapter 7 Installing GPS Antenna Feeder System
7.7.2 Installing 1/2" Feeder Grounding Clips
Context
Figure 7-36 shows the structure of GPS 1/2" feeder grounding clip.
Figure 7-36 Structure of GPS 1/2" Feeder Grounding Clip
1. Body of grounding clip 2. M6 hexagon bolt (with plain
washer and spring washer) 3. Grounding cable
GPS 1/2" feeder grounding clip is easy to mount. It has the waterproof glue, so you need
not do the special waterproof processing.
The materials delivered to the field include:
l
The body of grounding clip (attached with tinned copper braid strap) and two M6x25
hexagon bolt (attached with spring washer and plain washer).
l
The assembled 0.8 m connects the grounding cable.
l
One M8 x 25 hexagon screw (attached with spring washer and plain washer).
l A pack of tung oil (10 ml).
Where, M8 x 25 copper screw is used to connect the grounding cable and busbar.
In some special cases, if you want to make and connect the grounding cable, you shall do
the following preparations:
l Black 10 mm 2 grounding cable with copper core.
l
Grounding terminal (at grounding clip side) and grounding terminal (grounding busbar
side).
7-29
SJ-20110531095035-004|2011-10-28 (R2.0) ZTE Proprietary and Confidential