Zte ZXC10 CBTS O1, Техническое руководство

Страница: 62 / 73

ZXC10 CBTS (V1.0)Technical Manual
62 Confidential and Proprietary Information of ZTE CORPORATION
Working bands 1.9 GHz and 2.1GHz
(RBW 1MHz)
> 4MHz offset:
< -36 dBm(RBW 1 kHz) @ 9KHz < f <150 kHz
< -36 dBm(RBW 10 kHz) @ 150KHz < f < 30
MHz
< -36 dBm(RBW 100 kHz) @ 30MHz < f < 1
GHz
4-16MHz offset:
< -30 dBm (RBW 30 kHz) @ 1 GHz < f < 12.5
GHz
16 M ~ 19.2 M offset:
< -30 dBm (RBW 300 kHz) @ 1 GHz < f <
12.5 GHz
Code domain power
(inactive channel)
32 dB less than the total output power
Total power
Rated power -4 dB ~ rated power + 2 dB
(refer to IS-97D for the definition and test of
total power)
Waveform quality
ρ > 0.97
Pilot time tolerance
< 3 us; ± 1 us between every two CDMA
channels of the same BTS; If the outer system
clock is interrupted, the time difference
between the BTS and CDMA should be kept no
more than
± 10 us during 8 hours’ time
Pilot channel and code-
division channel time
tolerance
< ± 50 ns in the same CDMA channel
Pilot channel and code-
division phase tolerance
≤ 0.05 (in radian) in the same CDMA channel
Pilot power
Ratio of pilot power / total power ≤ ± 0.5 dB of
the configured value
Output power of amplifier LPA: 40W; DPA: 40W /80W
Output linear dynamic
range
> 30 dB
RF (Tx) front end VSWR < 1.50
Clock
1. BTS Clock technical parameters
Frequency benchmark: The accuracy of frequency 10 MHz is better
than 10
-11
in GPS locked status and is better than 10
-10
in the holdover
status.
The temperature variation is required to be less than ± 0.5 × 10
-9
.
2. Clock Synchronization Source