Chapter 4 Network Configuration
4.3.2 Configuring DHCP Binding
Short Description
Perform this procedure to configure the DHCP binding.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the
DHCP
binding, perform the following steps:
Steps
1.
On the
Network
tab, select
Address Management
, and then select
DHCP Binding
,
as shown in
Figure 4-13
.
Figure 4-13 DHCP Binding
2.
Configure binding between the
MAC
address and IP address. Create a DHCP binding
table to map the client MAC address to the IP address.
The DHCP server allocates IP addresses according to the binding relations, and the
binding relations do not expire.
For example, if the MAC address is set to
00-0a-e2-c6-48-ba
and the IP address
is set to
192.168.1.113
, it indicates that the DHCP server allocates the IP address
192.168.1.113 to the host which the MAC address corresponds to.
Note:
The IP address belongs to the address pool that is provided by the DHCP server in
the LAN group.
4-15
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Содержание ZXA10 F660
Страница 6: ...IV ...
