Zte V8110, Руководство пользователя

Страница: 6 / 31

-6-
Before getting started
Inserting and removing the SIM/USIM
Insert the SIM/USIM card as follows:
1.
Switch off your phone and disconnect any
external power.
2.
Remove the back cover and then the battery.
3.
Hold your SIM/USIM on the cut corner, and
slide it face down into the card holder.
4. Insert the battery.
5. Replace the back cover.
Note :
The two card slots of the phone support both SIM card (GSM
network) and USIM card (WCDMA network). However, when the
USIM cards are used at the same time, the phone supports one
USIM card (WCDMA network) only.
Inserting a memory card
1. Open the battery cover on the back of your phone.
2. Push tightly until the card is installed in the right position and
close the cover.