Zte Q200, Руководство пользователя

Страница: 25 / 25

ZTE-C Q200 User Guide
Confidential and Proprietary Information of ZTE CORPORATION 23
C h a p t e r
18
Radio Frequency (RF) Energy
This device meets the government’s requirements for exposure to radio waves.
This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using
standard operating positions accepted by the FCC with the device transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value. This is because the
device is designed to operate at multiple power levels so as to use only the poser required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower the power output.
The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 1.11
W/kg and when worn on the body, as described in this user guide, is 1.12 W/kg (Body-worn measurements
differ among phone models, depending upon available accessories and FCC requirements.)
While there may be differences between the SAR levels of various phones and at various positions, they all
meet the government requirement.
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as
in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the
FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on
FCC ID: Q78-ZTECQ200.
For body operation, this device has been tested and meets the FCC RF exposure guidelines for use the
positions the device a minimum of 1.5cm from the body. Use of other enhancements may not ensure
compliance with FCC RF exposure guidelines.