11
Push down the battery
Removing the battery
1.
Make sure that your mobile phone is switched off.
2.
*Remove the battery cover.
3.
Pull the battery up and remove it from the mobile phone.
Pull up the battery
12
* Note:
The correct way to remove the battery cover varies
with the model of the mobile phone. Please refer to the
following diagrams.
remove the battery cover
How to insert the SIM card
You want a mobile phone that is sophisticated yet easy to use
and here it is in your hands! Naturally you are eager to start
using it, but first you need to insert the SIM card.
Insert the SIM card as follows:
Make sure that the phone is switched off and the charger is
disconnected from the phone.
Turn the phone over and remove the battery cover.
Remove the battery if it is already installed.
13
Hold your SIM card with the cut corner oriented as shown and
then slide it into the card holder with the gold-colored
contacts facing downward.
Replace the battery first.
Replace the battery cover.
Insert the SIM card Pull out the SIM card
* Note:
SD card not hot-swappable.
14
What is a SIM card?
Every mobile phone has a SIM card (Subscriber Identity Module).
This is a micro-chip that holds your personal information such
as names and phone numbers. Your phone won’t work without
it. If you already have contacts on your SIM card, they can
be transferred in most cases.
How to charge the battery
Your phone is powered by a rechargeable battery. For maximum
battery performance, it is recommended that you first use up the
battery power and then charge it completely. A new battery’s
full performance is achieved only after three complete charge
and discharge cycles.
Connect your travel adapter to the side of your mobile phone
as shown in the diagram.
Note:
The side with arrow should be upright while
connecting.
Connect the other end of the travel adapter to the mains
socket.
If you charge the battery when the phone is switched off, the
battery indicator appears with the bars moving from right to
left. If you charge the battery when the phone is switched on,
the battery indicator display from right to left.
When the battery is fully charged, disconnect the charger.
15
Insert
Powering on/off your phone
Make sure that your SIM card is in your mobile phone and that
the battery is charged.
Please hold the End/Power key to power on/off the phone.
The phone will automatically search for the network.
Writing text
Change input mode: Press the # key to change the input
mode (input modes: En,en,EN,*Abc, abc, ABC and 123).
Input Letters: In *Abc/abc/ABC mode, press the
corresponding letter key till the letter appears.
16
Input Words: In En/en/EN mode, input any letter with a single
key press. Press each key only once for every letter. The word
changes after each key stroke. Predictive text input is based
on a built-in dictionary. When you have finished writing the
word and it is correct, confirm it by pressing the 0 key or the
Centre key. If the word is incorrect, press the Up/Down keys
to view other matching words found in the dictionary.
Pressing the Navigation keys moves the cursor.
Input Digits: In 123 mode, press digit key once to input a digit.
In En/en/EN mode, press the digit key, and select the number
by pressing the Navigation keys. In *Abc/abc/ABC mode,
constantly press the digit key until the number appears.
Input Symbol: Press the * key to enter a symbol. In
*Abc/abc/ABC mode, constantly press the 1 key till the
required symbol (common symbols) appears.
Selecting Template: Hold the Left Soft Key- Options-Insert
template to open Templates. Select the required template.
Input Space: Press the 0 key to input space. It does not work
in 123 mode.
Delete Character: Press the Right soft key to clear a character.
Hold the Right soft key to delete all characters and clear the
display.
Move Cursor to Left or Right: Press the Left/Right navigation
keys to move the cursor to left or right.
*Note:
Abc mode is only available for certain models.
17
How to add people to your Contacts
There are some numbers that you may want to call again and
again, so it makes sense to add these numbers to your contact
list. You can then access these numbers quickly and easily.
1.
Go to
Menu
>
Contacts
>
All/Group
>
Options
>
New
2.
Edit the information and save it.
You can also save a number right after you’ve made or
received a phone call or a text message from someone who is
not yet in your Phonebook list.
To delete someone from your Phonebook list, first select the
name, then select
Options>Delete.
How to make and receive calls
The most basic way to make a call is to input the number in the
standby mode and press the Send key. You can also make a
call from the Phonebook list.
To call someone: Go to
Menu
>
Contacts
>
All/Group
. Use the
Up/Down keys
to find the name of the person you want to
call. You can also type in the first letter of the name of the
person you want to call to find the right name, and press the
Send key
.
To receive a call, press the
Send key
.
To end a call, press the
End/Power key
.
To reject a call, press the
End/Power key
.
Make sure that you are in an area with sufficient coverage to
make calls. The strength of the network signal is indicated on
the Status Bar of the screen.
18
How to send and receive messages
You can use your mobile phone to send and receive messages.
1.
Go to
Menu
>
Message
>
Write message
.
2.
Write your message, and, edit the recipient. For more
information on input method, see section ‘Writing text’.
When you write an SMS, press
Options
>
Send
, and then
send it.
3.
When you finish writing an SMS, select
Options
to send or
save the message.
Upon receiving a message, the mobile phone will alert you with
a ringtone, prompt, or a new message icon.
1.
Press
Inbox
to enter the Inbox directly and then press the
Center key
to reply the message.
2.
Use the
Up/Down keys
to view the message.
3.
While the message is open, use
Options
to delete, reply, or
forward the message. You can also call back the sender.
How to set your phone
You can adjust various settings of your phone.Go to
Menu>Settings
.
Phone settings: Select language, set auto power on/off,
Date and time,etc.
Network selection: Set to automatically or manually select
network.
Security settings: Set security features to protect you from
unauthorized use of your phone and SIM card.
19
Phone settings>Restore factory settings: Enter the phone
password to restore to the factory settings. Some personal
information might be lost if you use this function, so be
careful.
Note:
You may be required to input the phone password in
some of the security settings interfaces. The default
password is 1234. You also can change the password in
Settings.
How to set your alarm
Set alarm: Go to
Menu>Alarm
, You can view, and edit the
alarm clocks settings. You can also enable or disable the alarms,
or set the corresponding features of the alarm according to
instructions: Alarm Message (if required), Time,Ringtone,and
Repeat mode.
*FM Radio
Go to
Menu>FM radio
.
With the radio, you can search for radio channels, listen to
them, and save them on your device. Note that the quality of
the radio broadcast depends on the coverage of the radio
station in that particular area. In the FM radio interface, you
can press the Up/Down keys to adjust volume, press the
Left/Right keys to tune the frequency, and press the Centre key
to pause. Select Options to enter the submenu.
Note: please take your handset as the standard.
10
Interface icons
Signal strength
Incoming message
Call diverting
Silent
Roaming
Alarm clock set
Vibration
Battery status
Battery
The lithium ion battery of the mobile phone can be immediately
used after unpacking.
Installing the battery
1.
*Remove the battery cover.
2.
Insert the battery by aligning the gold-colored contacts
with the contacts in the battery slot.
3.
Push down the upper section of the battery until it clicks
into place.
4.
Replace the battery cover and close it gently.
