5
Disposal of your old phone
When the wheelie bin symbol is attached to a product, it
means the product is covered by the European Directive
2012/19/EU.
All electrical and electronic products should be disposed
of separately from normal household waste via designated
collection points provided by government or local authorities.
The correct disposal of electrical and electronic products will help
protect the environment and human health.
Declaration of RoHS Compliance
We’re determined to reduce the impact we have on the environment
and take responsibility for the earth we live on. So this document
allows us to formally declare that the NX597J, manufactured by
Nubia Technology Co., Ltd, fully complies with the European
Parliament’s RoHS (Restriction of Hazardous Substances) Directive
2011/65/EU, with respect to all the following substances:
(1) Lead (Pb)
(2) Mercury (Hg)
(3) Cadmium (Cd)
(4) Hexavalent Chromium (Cr (VI))
(5) Polybrominated biphenyl (PBB)
(6) Polybrominated diphenyl ether (PBDE)
Our compliance is witnessed by written declaration from our
suppliers. This confirms that any potential trace contamination
levels of the substances listed above are below the maximum level
set by EU 2011/65/EU, or are exempt due to their application.
The NX597J manufactured by Nubia Technology Co., Ltd meets all
the requirements of EU 2011/65/EU.
6
Safety warning
To prevent possible hearing damage when using a
headset, do not use high volume for long period.
Use the earphone carefully. Excessive sound
pressure from headsets and headphones can cause hearing loss.
Adapter shall be installed near the equipment and shall be easily
accessible.
The phone's normal operating temperature is -10
℃
~ 45
℃
. In
order to ensure the normal phone functions, do not use this
phone outside the temperature range.
FCC Regulatory Compliance
FCC Regulations:
This mobile phone has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiated radio frequency
energy and, if not installed and used in accordance with the
instructions,
may
cause
harmful
interference
to
radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not expressly approved by Nubia
Technology Co., Ltd.
for compliance could void the user‘s authority
to operate the equipment.
