Zte MF91 Скачать руководство пользователя страница 5

Страница: 5 / 44

Confidential and Proprietary Information of ZTE CORPORATION 5

1.Getting Started

ZTE MF91 is a 4G mobile hotspot device, working in GSM/GPRS/EDGE/WCDMA/HSPA/HSPA+ /LTE

network. The client devices can connect to the device via USB or Wi-Fi interface; the device supports

data services, enabling you to communicate anytime and anywhere.

1.1 Device Appearance

The following figure shows the appearance of the device. It is only for your reference. The actual device

may be different.

1. External Antenna Connector

It is used to connect an external antenna to enhance the

signal strength.

2.WPS

This button is used to start/end Wi-Fi Protected Setup

authentication process and enable/disable the Wi-Fi function.

Hold it for 3 seconds to activate the WPS function.

When the WPS function is available, press it to deactivate the

WPS function.

Press it to enable/disable Wi-Fi function.

3. OLED Screen

It indicates the network type, signal strength, battery, Wi-Fi, etc.

4.Power

Hold the

Power

button to switch on/off the device.

5.Memory card slot (microSD
card)

It is where you insert the memory card (microSD card).

6.Charger/USB port

Charge your device.

Connect the client to your device via USB cable.

Содержание MF91













































Результаты поиска

Содержание MF91

Отзывы:

Похожие инструкции для MF91

Бренды по названию

Популярные бренды

Zte MF91, Руководство пользователя

Результаты поиска

Содержание MF91

Отзывы:

Похожие инструкции для MF91

Бренды по названию

Популярные бренды