background image

 

6 Confidential and Proprietary Information of ZTE CORPORATION

FCC ID: 

Q78-ZTEMF667

 

FCC Compliance 

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that 

this device does not cause harmful interference and this device must accept any interference 

received, including interference that may cause undesired operation.

 

Caution: Changes or modifications not expressly approved by the manufacturer could void the 

user’s authority to operate the equipment. 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of 

the following measures: 

—Reorient or relocate the receiving antenna. 

—Increase the separation between the equipment and receiver. 

—Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected. 

—Consult the dealer or an experienced radio/TV technician for help. 

 

How to get help 

You can get Help by: 

• Clicking 

Help

 on the software. 

• Sending E-mail to 

[email protected]

 

• Visiting 

http://www.zte.com.cn

 

• Calling Service Hotline: 

+86–755–26779999

 

Содержание MF667








































Отзывы: