Zte MF58, Руководство пользователя

Страница: 56 / 58

Administrator main menu operation
28
Setting the validation of
non-white list user #owner*on|off#[pin]#
The default is “on”.
If the switch is set as “on”, the Mobile Cam will prompt user to
input his calling number in the following situations, so as to
decide whether the video call is allowed:
1. the incoming call doesn’t carry any number (may be the
caller is roaming or the caller disables the phone to send its
number), or
2. the incoming call’s number exceed 20 digits, or
3. the white list reaches its limit and the incoming call’s number
isn’t in the white list.
If the entered number is in the white list, then the user will be
further prompted for the PIN and video call will proceed if the
PIN is correct. If the number is not in the white list or the PIN
has been input incorrectly 3 times, the call will be disconnected.
If the switch is set as “off”. the Mobile Cam won’t allow the video
call in the following situations:
1. the incoming call doesn’t carry its number (may be the caller
is roaming or the caller disables the phone to send its number),
or
2. the incoming call’s number exceed 20 digits, or
3. the incoming call’s number isn’t in the white list and the
white list reaches its limit
Note:
1) SMS commands can only be sent by the administrator’s mobile phone number. The SMS will
not be recognized by the Mobile Cam if a command is sent from another mobile phone number.
2) All commands can be in lower-case or upper-case letters.