Zte IX256, Руководство пользователя, Страница: 35 / 74

35
Manually set the SSID and channel is strongly recommended.
And select the known channel from channel 1 to channel 14.
·If you select Disable , WDS is disabled.
·If you select Lazy Mode ,WDS is enabled, and set wireless
MAC address only on the peer APs.
·If you select Bridge Mode , WDS is enabled, and set the peer
APs wireless MAC address on router. When you set Bridge
Mode , your PC can not search SSID of AP after connected.
·If you select Repeater Mode , WDS is enabled, and set the
peer APs wireless MAC address on router. When you set Re-
peater Mode , your PC can search SSID of AP after connected.
CCK : 802.11b
OFDM : 802.11g
HTMIX : 802.11b/g/n Mixed Mode
GREENFIELD : 802.11n
If you select NONE , all the data transmitted without encryption,
and other station can access router.
Only Repeater Mode and Bridge Mode need this.
WDS configuration is shown below:
Step Description
1.Set the same SSID
and channel for APs
2.Select WDS mode:
Disable, Lazy Mode,
Bridge Mode or
Repeater Mode
3.Select Phy mode :
CCK,OFDM,HTMIX or
GREENFIELD
4.Select Encryp Type :
WEP,TKIP,AES
5.Set AP MAC
Address on router
Ordinary Operation