Zte H298N, Руководство по обслуживанию

Страница: 15 / 133

Figure 2 USB Interface
Table 2 describes the ZXHN H298N interfaces and buttons.
Table 2 Interfaces and Buttons
Interface/Button Description
ON/OFF Power button
WPS Establish WLAN Push-Button connection.
WLAN WLAN button, used to switch on/off WLAN.
Reset Reset button, used to restore the factory default settings when pressed for more
than 5 seconds in power-ON state.
Power Power jacket, 12 V DC .
LAN1–LAN4 RJ-45 LAN network ports, connected to the local network through the RJ-45
network cable.
Phone1 – Phone2 RJ-11 port, connected to the phone through the telephone line.
WAN Uplink Ethernet interface.
USB1 USB HOST port, used for the USB storage device connection.
15