82
2.
If Bluetooth power is set to off, you will be prompted to turn the power on. Press
Yes
to
enable Bluetooth.
3.
The device will appear in the Bluetooth Devices menu once it has been located.
Highlight the desired device and press
OK
.
4.
The phone will prompt you for the pass key. Consult the Bluetooth accessory
instruction manual for the correct pass key. Enter the pass key and press the
OK
key.
5.
Once connected, you will see the device listed in the paired Devices menu, and the
Bluetooth icon will appear on the status bar.
GPS
You phone’s GPS features enable service provides to locate your position in emergencies,
or for other services to request your position. You may change the following settings:
1.
GPS Status:
Sets your GPS status to be On, or Emergency only. The Emergency only
setting allows the network to check your location only in emergency situations. If you
would like other services to have access to your location, set the GPS status to be On.
Setting the GPS Status to On will enable the GPS privacy settings below.
2.
GPS Privacy:
You can set your privacy to be By Permission, Restricted or
Unrestricted.
Others
The Others menu provides additional phone settings.
Shortcuts
The Shortcuts menu allows you to assign a shortcut to your favorite and most frequently
used applications. After setting the shortcut, you can access the assigned application it by
holding the corresponding key in standby mode. To modify a shortcut:
1. Select
Menu
→
Settings
→
Others
→
Shortcuts
from standby mode
2.
Highlight the desired shortcut letter and press
Select
.