Zte AC2791 Скачать руководство пользователя страница 4

 

  CDMA2000 1X EV-DO Wireless Data Terminal User Guide 

ZTE Corporation

 

1

 http

:

//www

.

zte

.

com

.

cn 

 

1.

 

Introduction 

Thank you for choosing ZTE Corporation’s CDMA2000 Wireless Data Terminal (hereinafter 
referred to as Data Terminal). 

Data Terminal supports both CDMA2000 1X EV-DO and CDMA2000 1X network. In the area 
where there is signal, it allows you to go surfing on the Internet, send & receive short messages. 

The pictures in this help are only used to demonstrate your Data Terminal’s functions, so they are 
maybe different from what you see on your Data Terminal. Please refer to your Data Terminal if 
they are differences. 
 

2.

 

Precautions 

 

Use the original accessories or those authenticated by the manufacturer. Using any 

unauthenticated accessories may affect the data terminal’s performance, violate the warranty 

provisions or relevant national regulations about telecom terminals, or even cause body 

injury. 

 

Do not disassemble, modify, frequently pull/plug the antenna, stretch, rotate or bend the 

antenna with great force. 

 

Before pulling out the data terminal, please use Windows safely removing the hardware and 

make sure to exit the application. Do not directly pull out the terminal to avoid the damage of 

data terminal or the influence on the normal operation of operating system. 

 

Do not forcefully plug/pull the data terminal to avoid the damage of connector. 

 

Do not use your data terminal near weak signal or high-precision electronic devices. Radio 

wave interference may cause misoperation of electronic devices or other problems. 

 

Turn off your data terminal on airplane where it’s forbidden to use it. The data terminal may 

affect the normal operation of electronic devices, therefore please follow the relevant 

regulations when using your mobile phone on airplane. 

 

Turn off your data terminal in hospital where it’s forbidden to use it. The data terminal may 

affect the normal operation of medical apparatus, therefore please follow the relevant 

regulations when using your mobile phone in hospital. 

 

Please do not use the data terminal near flammable or explosive materials; otherwise it might 

cause failure or fire. 

 

Keep your data terminal away from water. This may cause overheating or failure if water or 

any other kind of liquid enters your mobile phone. Please do not use your data terminal near 

high temperature, damp or dusty place. 

 

Keep your data terminal away from children to avoid shock, plunge or impact. It may cause 

body injury when the data terminal is used as a toy. 

 

Содержание AC2791

















Отзывы: