c.
Push and hold any one of the trim buttons on the transmitter while simultaneously
turning on the power. Hold until the transmitter beeps.
d.
Move the throttle from low to high and back to low. The flashing will stop, and you
will now be linked
e.
The transmitter will remember this link for future operation.
CARE AND MAINTENANCE:
Caution!
When working on your plane with the battery installed, always remove the propeller
to avoid the chance of injury if the motors accidentally turn on.
•
Parts damaged beyond repair can be purchased separately. Often though, parts can be repaired
easily, and you can get your airplane back into the air with a little glue and ingenuity.
•
This airplane is made from durable foam which can be glued with just about anything. Most
people use regular CA or epoxy. Use tape if needed to hold the parts together until the glue
dries.
•
After every flight, check the plane over to make sure nothing has come loose. Check all the
adjustable links to make sure they are secure.
•
Periodically, check all the electrical connectors to be sure they are secure.
•
Always remove the batteries from the transmitter for long term storage.
REPLACEMENT PARTS:
Parts:
TA088-01 Foam parts set
TA088-02 Propeller
TA088-03 Float wire set
TA088-04 Motor mount
TA088-05 9g Servo
TA088-06 17g Servo
TA088-07 2830-1300kv
Motor
TA088-08 30A ESC
TA088-09 Landing gear with wheels
TA088-10 Spinner set
TA088-11 11.1V 3S 1800mAh 25C Lithium Polymer Battery (T-style plug)
TA088-12 Receiver
TA088-13 Motor Heat Sink
TA088-14 Wing cover/Cowling
TA088-15 C-420 charger
TA088-16 Hardware set
