7
CHARGING
THE
BATTERIES
Before riding the electric scooter for the first time, you must charge the batteries for 6-9 hours using the
supplied charger.
IMPORTANT CHARGING INSTRUCTION:
The Power Switch Lock must be in the off position when the electric scooter is being charged.
The scooter uses a 60V lithium battery. You should charge your electric scooter after each ride. You must re-
charge your electric scooter if it has not been used for 30 days or more. Recharging time is between 6-9 hours.
A.
Locating the Charging Socket
: T
urn the ignition lock to “SEAT OPEN” position, then press and open the
seat buck. Remove the battery from inside and disconnect the plug from the battery case carefully.
B.
Charging the Scooter
. Turn the scooter off by pointing the key to
. Insert the output plug in the
charging socket of the scooter and connect the input plug 220V/110V to the wall socket (please refer to the
illustration on page 7). The battery is fully charged when the charger indicator shows green. We suggest
allowing an extra 1-2 hours charging time to achieve better battery condition. When the battery is fully
charged, remove the charger input plug followed by the output plug.
Battery case
For one battery:
For two batteries:
+
bat
ter
y
_
+
bat
ter
y
_
1.
Do not place the battery near a heat source or fire. Do not expose the charger to water.
2.
Do not cover the charger with anything whilst charging.
3.
Please use the authorised charger to charge the battery otherwise the warranty will become void.
4.
Please follow the charging instructions above.
5.
When there are two battery boxes, the battery packs must be charged and discharged at the same
time.
6.
Before connecting the battery, raise it approximately 10cm to connect easily.
Содержание e-city
Страница 1: ......
Страница 12: ...12 WIRING DIAGRAM...