English
2
3. Getting Started
Please follow following steps for quick connection guidance of the
encoder.
Step 1. Fully charge before starting to use the encoder.
Step 2. Plug 4G/5G SIM card and connect the antenna to the
encoder.
Step 3. Plug 4G USB dongle (
ZTE MF833V 4G LTE dongle is
recommended
).
Step 4. Press the RED Power button
on the left of the encoder
to turn on the system.
Step 5. Turn on your camera or video source and connect the
output to corresponding connection of the encoder. Encoder will
automatically recognize the input signal.
Step 6. (Optional) Plug headphones into the 3.5 mm headphone
jack of the encoder.
Step 7. Connect the encoder to LAN if available.
4. Streaming
LAN
The IP address of the encoder will show on the LCD
once
connected to LAN or WIFI, users can enter the IP address into the
address bar of the web browser on PC or phone, and then the
encoder Web Control User Interface will be shown as follows. In this
example, the IP address is 192.168.1.104.
WIFI
There are four ways to connect WIFI.
1.
On LCD, please switch the “WIFI” button is Open, then the
user can press the “Scan” button, find WIFI name and connect
it.
2.
Or press the
“Setting”
button, then input WIFI SSID and
Password to connect a network, and don’t forget to click
“
√
”
in the top right corner to save and apply it.
