ZowieTek 90482-970, Руководство пользователя

Страница: 17 / 18

1080P HD Smart PTZ Camera User Manual
14
7.9 Device Information
7.10 Download Upgrade Program
If you need the camera upgrade program, please
contact the manufacturer.
WEB interface and parameters are
subject to change without notice.
8
Troubleshooting
Image

The monitor shows no image
1) Check that the camera power supply is
connected, the voltage is normal, and the
power indicator light is always on.
2) Turn off the power switch to check whether
the camera is self-testing.
3) Check the cable of video platform and TV
whether correct connection.

The video image displayed by the camera lens
is jittery
1) Check whether the camera installed position
be stabled.
2) Check whether have vibrating machinery or
object near the camera.

There is no video image in Browser
IE browser does not support H5, you need to use
VLC plug-in to view videos. Please access VLC
website (http://www.videolan.org/vlc) download
and install the 32-bit VLC media player, after it
installed, access camera will have normal image
display. Other mainstream browsers already
support H5 and do not need to install the VLC
plug-in.

Unable to access camera through Browser
1) Using PC to access the network to test
whether the network access can work
properly, first of all, the network fault caused
by the PC virus can be eliminated, until the
PC and camera can communicate with each
other Ping.
2) Disconnect the network, connect camera
and PC separately, and reset the IP address
of PC.
3) Check IP address, subnet mask, and gateway
settings for camera.
4) Check whether the MAC address is conflicts.
5) Check whether the web port is modified.
The default web port is 80.

Forget the IP address or login password
Please remember (The default IP address:
192.168.100.88; default user name: admin;
default password: admin).
Control

Remote control cannot control
1) Check and replace the new battery for the
remote controller.
2) Check whether the camera working mode is
correct.
3) Check whether the address of remote control
can match the camera.

Serial port cannot control
1) Check whether the camera protocol, address
and baud rate such is the same.
2) Check whether the control line is connected
well.
Information
HD Camera Device ID
V.F1
Device Type
v1.5.5 Webware Version
X8.02.15
Software Version
Submit Cancel
X6v19260f6c9
Device Serial Number
Note