4
• Charging Current: 300 mA
• Sleep Mode Current: <200μA
Battery: 450mAh rechargeable polymer Lithium-ion battery
Installation
• Open the giftbox and pick up USB receiver.
• Insert the USB Receiver into an available
USB port.
• Turn on the keyboard with the switch. The
keyboard is found and installed automatically.
No further actions are required – you are now
ready to use your keyboard!
NOTE: USB cable is used for battery charging only.
Using Air Mouse
In open status, the cursor will follow your
gestures to do the corresponding action,such
as, moving, clicking and dragging, etc. Press
FN + ALTGr can lock the air mouse and switch to the
Touchpad mode.
Notice: The cursor may move automatically if the devices
encounters temperature change, falling-down, or impact.
The following steps are required for cursor correction:
a.Turn on the device.
b.Place the device horizontally on the table.
c.Press FN+Left Key of mouse and release.
d.The device will be reset. Backlit Led and blue light will be
on 3 seconds. After that, the correction is done.
