12
Test for Continuity
1. Connect the black test lead to the COM
Terminal and the red lead
to the V
Ω
Hz
Terminal.
2. Turn the rotary switch to
, press SELECT
once to toggle to the Continuity Mode.
3. Touch the probes to the desired test points of
the circuit.
4. The
built-in
beeper
will
beep
when
the
resistance is lower than 50
Ω
, which indicates a
short circuit.
Test Diodes
1. Connect the black test lead to the COM
Terminal and the red lead
to the V
Ω
Hz
Terminal.
*Do not input voltage at this setting.
*Disconnect
circuit
power
and
discharge
all
capacitors before you test resistance.
*Do not input voltage at this setting.
