Zotac nForce 610i - ITX, Руководство пользователя

Страница: 23 / 74

NForce 610i/630i-ITX series Motherboard
Jumper Setting
This chapter explains how to configure the motherboard’s hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this
chapter whenever in doubt.
Notice
:
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be
seen even if the frequency multiplier setting in CMOS setup is changed.
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) to clear data.
JP-CMOS Clear
JP Selection
1-2* Normal*
2-3
CMOS Clear
Close Open * = Default setting.
JP - P/S Port 5V Standby Power Selection
JP Selection
1-2* 5V standby power input*
2-3 5V power input
Hardware Installation