Zotac IONITX-T series, Руководство пользователя

Страница: 22 / 46

21
Configuring the BIOS
q
Palette Snooping
When set to [Enabled], the pallete snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly.
q
PCI IDE BusMaster
When set to [Enabled], BIOS use PCI busmastering for reading/writing to IDE
drives.
q
OffBoard PCI/ISA IDE Card
Use this option to set the PCI slot number for some PCI IDE Cards holding.
q
IRQ3/4/5/7/9/10/11/14/15
These items allow you to set the Interrupt Request.
q
DMA Channel 0/1/3/5/6/7
Use these items to set the Direct Memory Access Channel.
q
Reserved Memory Size
This item allows you to set the size of memory block to reserve for legacy ISA
devices.
Security
The security menu items allow you to change the system security settings. Press
<enter> to display the configuration options:
q
Change Supervisor/User Password
Select this item to set or change the supervisor/user password. The Supervisor/
User Password item on top of the screen shows the default setting: [Not Installed].
After you set a password, this item shows [Installed].
To set a Supervisor/User Password:
1. Select the item [Change Supervisor/User Password] and press <Enter>.
2. From the password box, type a password composed of at least six letters and/or
numbers, then press <Enter>.
3. Confirm the password when prompted:
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor/user password, follow the same steps as setting a use
password.
q
Clear User Password
Select the item to clear user password.
q
Boot Sector Virus Protection
The item allows you to enable or disable boot sector virus protection.