Zotac H87 Series, Руководство пользователя

Страница: 19 / 50

18
Intel H87-MATX series Motherboard
Jumper Settings
This section explains how to configure the motherboard’s hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this section
whenever in doubt.
CMOS Clear Jumper-JP1
Close Open * = Default setting.
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) to clear data.
Notice :
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen even if the
frequency multiplier setting in CMOS setup is changed.
JP1 Selection
1-2* Normal *
2-3 CMOS Clear
1
1
ME Update Jumper-JP3 (optional)
JP3 Selection
1-2* Normal
*
2-3 Intel Management Engine
(ME) update
1
1
RTC Clear Jumper-JP2
JP2 Selection
1-2* Normal *
2-3 RTC Clear
1
1