background image

20

    

Intel H61-MATX series Motherboard 

CPU Configuration

The items in this menu show the CPU-related information that the BIOS automatically 

detects. Press <enter>to display the configuration options:

q

 

Hyper-threading

Use this item to enable or disable Hyper-threading technology.

q

 

Active Processor Cores

This item allows you to choose the number of the active processor cores. The

default value is [All].

q

 

Limit CPUID Maximum

Allows you to determine whether to limit CPUID maximum value. Set this item

to [Disable] Windows XP operating system; set this item to [Enable] for legacy

operating system such as Windows NT4.0..

q

 

Execute Disable Bit

When disabled forces the XD feature flag to always return 0, defaults choose

[Enable].

q

 

Hardware Prefetcher

Use this item to enable or disable hardware prefetcher (hardware prefetch 

mechanism).

Adjacent Cache Line Prefetch

Use this item to enable or disable the adjacent cache line prefetch mode. If you 

disable this item, only one 64-bit line will be prefetched from the 128-bit section 

(including the required data). If you enable this item, two lines will be prefetched 

whether there is required data or not.

Intel Virtualization Technology

       Hardware Virtualization Technology enables processor feature for running multiple

      simultaneous virtual machines allowing specialized software applications to run in

      full isolation of each other.

Power Technology

Use this option to set Power Technology.

USB Configuration

 

The items in this menu allow you to change the USB-related features. Press <enter>

To display the configuration options:

Legacy USB Support

 

Allows you to enable or disable support for USB devices on legacy operating 

systems.

EHCI Hand-Off

Allows you to enable support for operating systems without an EHCI hand-off 

feature.

USB transfer time-out

Allows you to set USB transfer time-out.

Device reset time-out

Allows you to set device reset time-out.

Device power-up delay

Allows you to set device power-up delay.

Содержание H61MATX series















































Отзывы: