background image

   

    

Set Supervisor/User Password 

When this function is selected, the following message appears at the center of the 

screen to assist you in creating a password. 

ENTER PASSWORD 

Type the password, up to eight characters, and press <Enter>. The password typed 

now will clear any previously entered password from CMOS memory. You will be asked 

to confirm the password. Type the password again and press <Enter>. You may also 

press <Esc> to abort the selection. To disable password, just press <Enter> when you 

are prompted to enter password. A message will confirm the password being disabled. 

Once the password is disabled, the system will boot and you can enter BIOS Setup 

freely. 

PASSWORD DISABLED 

If you have selected 

System

” 

in “Security Option” of “BIOS Features Setup” menu, 

you will be prompted for the password every time the system reboots or any time you 

try to enter BIOS Setup. If you have selected

 “

Setup

” 

at “Security Option” from “BIOS 

Features Setup” menu, you will be prompted for the password only when you enter 

BIOS Setup.

Supervisor Password has higher priority than User Password. You can use Supervisor 

Password when booting the system or entering BIOS Setup to modify all settings. Also 

you can use User Password when booting the system or entering BIOS Setup but can 

not modify any setting if Supervisor Password is enabled. 

Save & Exit Setup 

Navigate to this option and press <Enter> to save the changes that you have made in 

the Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears, 

press <Y> to save and exit, or press <N> to return to the main menu. 

Exit Without Saving

 

Navigate to this option and press <Enter> to discard any changes that you have made 

in the Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box 

appears, press <Y> to discard changes and exit, or press <N> to return to the main 

menu. 

Note:

 

 If you have made settings that you do not want to save, use the “Exit Without  

    Saving” item and press <Y> to discard any changes you have  

Configuring the BIOS

Содержание GeForce 8100-ITX series















































Отзывы: