11
CONNECTORS
The motherboard provides connectors to connect to the FDD, IDE HDD, SATA,
USB Ports and to CPU/PWR/System FAN etc.
Floppy Disk Drive Connector - J10
The motherboard provides a standard floppy disk drive connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
Hard Disk Connectors:J9
The motherboard has a 32-bit Enhanced PCI IDE and Ultra DMA 66/100/133
controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 66/100/133
function. You can connect up to two hard disk drives, CD-ROM, 120MB Floppy
(reserved for future BIOS) and other devices.
J9 (Primary IDE Connector)
The first hard drive should always be connected to J9. J9 can connect a Master
and a Slave drive. You must configure the second hard drive to Slave mode by
setting the jumper accordingly.
J9
1
J10
1
