Zotac G41 series Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 56

background image

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with instructions
contained in this manual, may cause harmful interference to radio and television communications.
However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

- REORIENT OR RELOCATE THE RECEIVING ANTENNA

- INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND THE RECEIVER

- CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM

THAT OF THE RECEIVER

- CONSULT THE DEALER OR AN EXPERIENCED AUDIO/TELEVISION TECHNICIAN

NOTE:

Connecting this device to peripheral devices that do not comply with Class B requirements, or
using an unshielded peripheral data cable, could also result in harmful interference to radio or
television reception.

The user is cautioned that any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.

To ensure that the use of this product does not contribute to interference, it is necessary to use
shielded I/O cables.

Copyright

This manual is copyrighted with all rights reserved. No portion of this manual may be copied or
reproduced by any means.

While every precaution has been taken in the preparation of this manual, no responsibility for
errors or omissions is assumed. Neither is any liability assumed for damages resulting from the
use of the information contained herein.

Trademarks

All brand names, logos and registered trademarks mentioned are property of their respective
owners.

Electronic Emission Notices

WARNING!

1
2
3
...
»

Содержание G41 series

























































Отзывы:

Нет отзывов

Похожие инструкции для G41 series

Бренд: Quectel Страницы: 34

Бренд: ECS Страницы: 27

Бренд: SOLTEK Страницы: 72

Бренд: Texas Instruments Страницы: 23

Бренд: JETWAY Страницы: 48

Бренд: JETWAY Страницы: 48

Бренд: BiPOM Electronics Страницы: 12

A320M-K PRO V14

Бренд: Colorful Страницы: 12

Бренд: Maxus Страницы: 59

Бренд: K&B Страницы: 6

Бренд: MSI Страницы: 445

Бренд: AOpen Страницы: 8

Бренд: TYAN Страницы: 86

Бренд: PC Chips Страницы: 49

Бренд: DFI Страницы: 102

Бренд: DFI Страницы: 98

Бренд: DFI Страницы: 37

Бренд: MACCHIATObin Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды