Zotac G41-ITX series, Руководство пользователя

Страница: 22 / 46

21
Configuring the BIOS
q
ATA/IDE Configuration
Use this item to configure ATA/IDE. There are three options: [Disabled],
[Compatible] and [Enhanced]. The default setting is [Enhanced].
q
Configure SATA as
This item allows you to set the SATA to IDE/RAID/AHCI mode.
q
Configure SATA Channels
This item allows you to set the sequence of SATA channels. Options: [Before
PATA] and [Behind PATA].
q
Hard Disk Write Protect
This item will be effective only if device is accessed through BIOS.
q
IDE Detect Time Out (Sec)
The item allows you to select the time out value for detecting ATA/ATAPI devices.
q
ATA(PI) 80pin cable detection
The item allows you to select the mechanism for detecting 80pin ATA(PI) cable.
SuperIO Configuration
The items in this menu allow you to configure F71862 Super IO Chipset.
Hardware Health Configuration
This menu gives you an overview of the Hardware Health Configuration.
ACPI Configuration
The items in this menu allow you to set General ACPI onfiguration, Advanced ACPI
Configuration and Chipset ACPI Configuration.
MPS Configuration
The items in this menu allow you to select MPS revision.The default setting is 1.4.
PCI Express Configuration
The items in this menu allow you to enable or disable PCI Express L0S and L1 link
power states.
Smbios Configuration
The item in this menu allows you to enable or disable Smbios Smi Support.
USB Configuration
The items in this menu allow you to change the USB-related features .Press <enter>
To display the configuration options:
q
Legacy USB Support
Allows you to enable or disable support for USB devices on legacy operating
systems.
q
USB 2.0 Controller Mode
Allows you to configure the USB 2.0 controller in HiSpeed or Full Speed .
q
BIOS EHCI Hand-Off
Allows you to enable support for operating systems without an EHCI hand-off
feature.
Trusted Computing
The item in this menu allows you to enable or disable TCG/TPM support in BIOS.