background image

38

    

AMD 740G/760G/780G motherboard 

Global Connector Settings

Click 

          

  to access global connector settings

 

   Mute rear panel when front headphone plugged in

 

Once this option is checked, whenever front headphone is plugged, the music  

  that is playing from the back panel, will be stopped.

 

   Disable front panel jack detection (option) 

  Did not find any function on front panel jacks? 

  Please check if front jacks on your system are so-called AC’97 jacks. If so,    

  please check this item to disable front panel jack detection.

 

 

  Enable auto popup dialogue, when device has been plugged in.

 

Once this item checked, the dialog “Connected device”, would not automatically  

  pop up when device plugged in.

S/PDIF

Short  for 

S

ony/

P

hilips 

D

igital 

I

nterface,  a 

standard audio file transfer format. S/PDIF 

allows  the  transfer  of  digital  audio  signals 

from one device to another without having to 

be converted first to an analog format. Main

-

taining the viability of a digital signal prevents 

the quality of the signal from degrading when 

it is converted to analog.

Содержание 740G series



















































Отзывы: