6. Motion Detection
If you set Motion Detection, NVR will record only when motion or movement be captured.
Right click mouse > Main Menu > Setup > Alarm > Motion > Motion detection.
The system records when motion is detected by the camera. When motion is
detected,there will show an icon of " " in screen.
Select Camera.
Tick the Channel on which you want to set motion detection.
Holding Time.
Set alarming time length when motions be captured.
Trigger.
Multi-channels can be set to record motion synchronously if one of the camera
detect motion. For example, when camera 1 detects motion, camera 2 and camera 3 can
be triggered to record as well.
Area.
It is permitted to set sensitivity area of camera’s viewing range.
Click STAR to make the whole viewing range as sensitivity area;
Click Trash Box to remove sensitivity area;
Click and drag mouse to draw or erase the sensitive area Click to save setting
Click to exit
Both color and luminance can affect detection’s sensitivity, so it's necessary to adjust
the value of detection’s sensitivity in a specific status. The default sensitivity is 4 while
regular sensitivity ranges from 1 to 8.
Right click mouse to show or hide control menu at bottom of screen.
Test the setting by moving something within grid area, or make someone show up and
walk through this particular area. If camera detects these movement, a yellow hunanoid
figure will show up in the screen. Avoiding cause false alerts, the grid area should not
cover flag, trees or some other fluttering objects in the wind.
10
