ZOSI C308AH, Быстрый старт

Страница: 6 / 27

4
4
/Scan the QR Code to Connect
4.1 Add Unpaired Device
4.2 Open ZOSI Smart App and click "+" above or below to add a
device and select "C308AH" from the device list.
4.3Click "Add an unconnected device" on the Setup Up device
page and wait for device searching.
NOTE: Make sure that your mobile phone and base station are
connected to the same WIFI when searching for devices.
4.4 After device searching, follow the guide to power on the device
and proceed to "Scan QR Code" page.
4.5 Tap "Scan QR Code" and scan the QR code generated on
your phone with the camera lens, and then tap "Next" after the
scanning.
NOTE: The base station support simultaneous connection of
multiple devices, but only one camera can be viewed at a time and
multiple devices cannot be viewed at the same time.