Printer Maintenance
Once you notice that extrusion in your printer is not as effective as it should be, make
sure that the model material nozzle and hotend are not clogged, and if it is necessary,
clean both components.
Unscrew the nozzle counterclockwise using the nozzle key (when viewed from below).
NOTE! Unscrew the nozzle while the extruder is hot.
Load the material using the options from the menu. If the material is being extruded from
the hotend, the nozzle you have just removed needs to be cleaned or replaced. If the
material is not being extruded, the hotend module needs to be cleaned or replaced.
Also, make sure that there are no material remains on the extruder motor shaft. Carry
out extruder maintenance according to instructions from this
.
