zortrax FEP Film, Замена

Страница: 12 / 18

Securing the FEP Film Rack, part 1
In order for the FEP film to be properly tight, you have to create a bulge while securing
both parts of the FEP film rack. To do that, place the FEP replacement jig from the
Starter Kit or an item that is 8 mm [0.3 in] thick underneath the film. Next, slightly tighten
the silver screws in a diagonal order. Once the assembly of the FEP film rack is finished,
fully tighten all the screws.
Remember to press the rack while securing each screw to keep the bulge in the FEP
film.