are set at the factory to properly display the correct temperature. However, changing
environments may lead to small shifts in how the sensor detect and display
temperature. From time to time, it is advisable to compare the Zortemp 1000 readings
to a medical thermometer. If there is a notable di
ff
erence, simply change the “alarm”
temperature on the Zortemp 1000 to appropriately reflect what you need.
Options
There are built in options for the Zortemp 1000 that allow for interfacing with access
control software or for sending signals for controlling doors, turnstiles, etc.
-
Voltage Contact Point: there is a contact point available to supply 5VDC when a
person gets a “safe” reading. Contact Technical Support for assistance with
connecting and using this option.
-
Wifi Connection: The hardware for this option is now available, but software updates
are still in the works to enable connectivity.
Disclaimer
Our products are not used to diagnose the coronavirus. Zorpro is not advertising our
scanners for use in the medical industry or for medical purposes. Our products can
identify individuals in a population that show higher than average temperature based on
the set parameters. Our scanners do not find individuals experiencing coronavirus
symptoms. There is no way to thermally detect an infected individual who doesn’t have
an elevated body temperature. Only a licensed medical professional can determine if a
“hot” individual is experiencing an abnormal medical condition.
Warranty
The Zortemp 1000 is covered by a one year warranty against manufacture defects. All
warranty replacement and repair must be approved by Zorpro prior to replacement or
repair of the unit. Obvious abuse or neglect of the Zortemp 1000, will negate any
warranty coverage. The warranty does not cover damage caused by dropping the unit
or tipping it over on the floor or other hard surfaces.
Содержание Zortemp 1000
Страница 1: ...Zortemp 1000 Instruction Manual...
